PLAN #21: Kodiak

• 9 ft. high log walls hand peeled, scribe fitted and insulated Englemann Spruce logs with an average diameter of 12 to 14 inches.

• Norwegian shrink fit saddle notches at the corners, with fiberglass insulation for a warm weather tight fit.

• log support beams, log posts and log floor joist for the upper floor. Joist pre-flattened to accept flooring.

• log ridge, purlins and support post for the roof system cut at the correct roof pitch.

• log beams and posts for the exterior porch.

• steel through bolts at corners, door and large window openings, and sufficient drift pins.

• garage walls slabbed flat to accept framed truss roof.

• all window and door openings cut out, key wayed and flared back, ready for simple installation of units.

• one set of interior log stairs (Mortise & Tenon Const.).

• log hand rails and log pickets for interior stairs, open loft area and basement stairwell.

• ends of all logs sanded, chamfered and curled on top.

• working blueprints as per plan.

• labour to assist in the re-construction of log shell.

• F.O.B., 100 Mile House, B.C., Canada.