PLAN #22: Majestic

• 10 ft. 6 in. high log walls hand peeled, scribe fitted and insulated Englemann Spruce logs with an average diameter of 12 to 14 inches.

• Norwegian shrink fit saddle notches at the corners, with fiberglass insulation for a warm weather tight fit.

• log beams with log post and log floor joists flattened on top to support framed loft floor above.

• log ridges and "decorative" purlins flattened on top to support framed roof over the entire structure cut at the correct roof pitch.

• log beams with log posts to support over the screened porch area.

• steel through bolts at corners, door and large window openings, and sufficient drift pins.

• log gable truss for above the great room area.

• log truss for above the covered entry deck.

• all window and door openings cut out, key wayed and flared back, ready for simple installation of units.

• log stairs and landings for loft floor access (Mortise & Tenon Const.).

• log hand rails and log pickets for the stairs, across loft and around the exterior balcony.

• ends of all logs sanded, chamfered and curled on top.

• working blueprints as per plan.

• labour to assist in the re-construction of log shell.

• F.O.B., 100 Mile House, B.C., Canada.